Composition of mobile asphalt mixing equipment

Today, all production work is in line with environmental policies, and users are increasingly inclined to choose some environmentally friendly and energy-saving products.
Especially when we are building road works, the state also pays more and more attention to the environmental protection of asphalt mixing plant, among which the dust problem of asphalt mixing station construction site is one aspect that we pay more attention to.

Be sure to pay attention to all the dangers and pitfalls of precautionary, and require staff to ban smoking within three meters of diesel cans and heavy wood cans, not to have open fires, and not to let oil out when unloading oil.
Asphalt mixing station in the process of unloading asphalt, we must first determine the amount of asphalt in the tank, the valve opened before the asphalt can be unloaded, absolutely not allowed to smoke on the asphalt tank.

When the Mobile Asphalt Plant mixer is in the air running state, its vibrating screen appears tripping phenomenon, and has been unable to start normally.
In order to avoid affecting the construction progress, the asphalt and mixer need to be overhauled in time to avoid serious problems.

The second aspect, in the production process, must carefully inspect and maintain the dust removal equipment, to ensure its dust removal efficiency.
This is very important for the efficiency of dust removal equipment, but so far, there is still a large part of the asphalt mixing station users do not realize its importance, and so found that the dust removal effect is not ideal, the safety pressure relief valve began to ash, dust remover has been stuffed with dust, this time if taken to clean up the accumulated dust, etc., It was too late for the equipment to recover as it had been.
Therefore, it is necessary to formulate a reasonable inspection system, arrange a certain personnel to carry out batch inspection and maintenance, timely cleaning of dust removal equipment inside, for the need to replace the parts should be replaced in a timely manner.

Burner is the leading role, asphalt stirring manufacturers are using a new generation of axial flow oil and gas burners, to environmental protection, low calorific value emission as the core of the best burner model patents.

In carrying out maintenance work, the staff should pay attention to their own personal safety and be sure to fasten their seat belts when working in high places.
When someone is working inside the machine, it is necessary to arrange for personnel to look after the outside, while the asphalt mixing station power supply should be closed, without permission, the control room operators may not open without permission.

During the feeding period should also be carried out in accordance with the provisions, for example, when using forklifts, must observe the car before and after the personnel, in the cold hopper on the material must pay attention to speed and position, can not collide with the asphalt mixing station equipment.

When you start working, you should be prepared.
When everything is ready, when you are ready to start the machine, you should honk the horn to remind the people around you, make sure that the surrounding environment is safe before you can start the machine.
When producing loading, be sure to keep an eye on the location of the vehicle to ensure safety.
Asphalt mixing station Machine during operation, staff are required not to carry out the maintenance of equipment at will, only in the premise of ensuring safety, can carry out maintenance work, and must inform the control room operators in advance, control room operators have to agree with the outside personnel before restarting the machine.

Based on automation, industrial control, transmission and industrial information technology, NFLG develops a remote service platform, as well as software service experience, to provide customers with complete solutions from production, management to future services.

For the entire asphalt mixing station, the core part is its control system, which includes two parts of hardware and software.
Below we will take you to any detailed design of the control system of asphalt mixing station.

Doing a good job in the field dust removal of asphalt mixing station can not only improve the quality of production work as a whole, but also improve the working environment on site, but also reduce the pollution of the environment.

After the tripping problem occurred in the vibrating sieve of the asphalt mixer, we replaced the new thermal relay the first time, but the problem did not be alleviated still exists.
And in the resistance, voltage and other inspection process there is no power generation problem, that is the root of what? After excluding various possibilities, it was finally found that the eccentric block of the vibrating screen of the asphalt mixer was beating very violently.

Distortion-due to improper pavement construction, asphalt deformation caused by the deterioration of the underlying foundation or existing bitumen and high load factors includes: grooves or ruts, ripples and SH ploughs, ramp sag, uplift and practical cutting sag.